Harbour Tug

SOLD

Vessel Type:	Harbour Tug
Designer:	Mr Robert Allan - Canada
Model:	30TBP Harbour Tug
Year:	2004
Price:	Please call for price
Reference:	WIL 1055

Dimensions

LOA:	18m 29cm
Beam:	7m cm
Draft:	2m 91cm

Engines

MAIN ENGINES 2 x 1100 BHP Caterpillar 3508 B DITA Marine Engines 1,800 rpm GEAR BOXES 2 x Reintjes WAF 562 reverse reduction gearboxes reduction ratio of 5:1,elect.control PROPULSION SYSTEM 2 x 1700mm Cu-Ni-Al Bronze propellers in twin fixed 1930mm kort nozzles tail shaft-main shaft/coupling and propeller manufactured by “Wartsila Lips” ENGINE CONTROL 2 x Rexroth Pneumatic Control System RUDDERS/STEERING Data Hydraulic 2 x 2 x 45 degree Jastram high aspect flap rudders(x 2 for each nozzle) powered by variable displacement hydraulic pumps installed to the main-engines’ power take off. System is completely “load sensing” and independent of engine speed. GENERATOR 1 x Caterpillar 3054 43 kVA 50 Hz@1500rpm

No. of Engines:	2
Fuel:	Diesel
Drive:	Shaft Drive

Construction

CLASS-Bureau Veritas I Hull Machinery Tug Coastal Area

Hull Type:	Full Displacement
Hull Material:	Steel
Displacement:	84.21 Tonnes

Decking Equipment

BODY: Steel / Aluminium (accommodation) TOWHOOK: Data Hydraulic 30 tonnes SWL Pneumatic CAPSTAN: Data Hydraulic pull 1 ton with 12 m/min. ANCHOR WINCH: Data Hydraulic RESCUE BOAT: 6 person with 15 HP outboard engine FENDER: D-200 type Ermeksan make

Navigation Equipment

VHF: 2 x ICOM Marine VHF M 601 RADAR: JMA 1100 JRC Color LCD Radar 1800 Plotter Set

Safety Equipment

FI-FI 1 x pump and two foam monitor for water/foam. Capacity: 1200 cum per hour

Disclaimer

The details of this vessel is offered in good faith but cannot be guaranteed. Nor can we warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.