General Workboat

SOLD

Vessel Type:	General Workboat
Model:	Steel Catamaran
Price:	Please call for price
Reference:	WIL 1183

enlarge picture	enlarge picture

Dimensions

LOA:	44" '
Beam:	22" '
Draft:	5" 5'

enlarge picture	enlarge picture

Engines

SPEED: Cruising 9 knots
Maximum 12 knots

This superb steel catamaran is powered by her reliable twin 360 BHP Scania engines. The Scania drives her with an immense pulling power due to the backward facing engines driving her fixed blade propellers through her twin disc gearboxes. This allows her to handle any wave conditions and to manoeuvre with ease without having to use bow thrusters.

Able to work in close confines of restricted bays and harbours and with the pulling power she has, makes this workhorse stand out as being one of the best workboats we have for sale at the moment.

No. of Engines:	2
Fuel:	Diesel
Drive:	Shaft Drive

Construction

The twin steel hulls have been designed for her stability book to allow 16 tons on her decks. The stability book is included in the sale. The twin hulls allow a degree of manoeuvrability that only a catamaran such as this can deliver.

The deck has one large storage area for equipment or for cargo depending on what she is being used for at the time. The old timber deck was removed and a steel checker plate deck installed for both strength and for safety. Easier to maintain and less likely to slip when wet the deck allows for a variety of uses.

The bunks were specially made to suit the vessels hull and blend in with the same care and attention shown to the rest of the boat.

She has been used on:-

•The Film and TV industry
•Commercial & Sports Diving
•Research Work For The MoD
•Geographical Survey
•Support Of Dredging Operations
•Marine Construction
•Fishfarming Industry
•Pipeline & Outfall Projects
•Salvage & Towing
•Leisure Industry
•Safety Patrols & Support Vessel

Hull Type:	Full Displacement
Hull Material:	Steel

Accomodation

As this vessel is used for longer passages she is fitted with a heads and two berth accommodation.

Decking Equipment

•Deck Crane - 1 Ton at 6 metres
•Hydraulic Winch - 2 Ton core pull

Navigation Equipment

•VHF
•Compass
•GPS
•Echo Sounder
•Radar
•Searchlight

Safety Equipment

There is full safety equipment on board for her 10 passengers and two crew. She was MCA Workboat code of practice category 3 and all equipment is still in full working order.

Please Note: This vessel could be made Category 2 if required. The only reason the vessel was Category 3 was the owner only operates within the general area of where she is moored and does not require a higher category.

Disclaimer

The details of this vessel is offered in good faith but cannot be guaranteed. Nor can we warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.