Twin Screw Tug

SOLD

Vessel Type:	Twin Screw Tug
Year:	1965
Price:	Please Call For Price
Reference:	WIL 1209

enlarge picture	enlarge picture

Dimensions

LOA:	20m 10cm
Beam:	4m 50cm
Draft:	2m 80cm

enlarge picture	enlarge picture

Engines

Main Engine
This vessel is fitted with two Scania engines and they are DSI11 M01(1980) – 2 X 202 KW – Total power of 404KW. If you look at the photographs you will see that they are in excellent condition. The consumption is only 80 Litres per hour.

Speed: 9-12 knots

Gen Sets
Ford/Newage-Stamford – 380V
AC – 220/380V
DC – 12/24V

Bunkerage
Fuel Oil: 4.5 Tonnes
Water: 1 Tonne

No. of Engines:	2
Fuel:	Diesel
Drive:	Shaft Drive

enlarge picture	enlarge picture

Construction

This vessel was manufactured in Sweden for the Swedish Navy. As she had to be available at any time her steel hull was strengthened to Ice Class and she was fitted with four watertight compartments.

Registered Tonnage: 47.03

enlarge picture	enlarge picture

Accomodation

This vessel was built as a self contained unit and as a result has 2 x Double and 2 x single cabins for her crew.
Galley is fitted out with a cooker and 2 x fridges and 2 x freezers
Heads
Shower
2 x sinks
Central heating throughout.

Decking Equipment

1 x Crane Hiab-Foco – 2 Tonnes crane
1 x Hydraulic winch
Bollard Pull – 7 Tonnes

Navigation Equipment

1 x GPS
2 x VHF
1 x Autopilot

Safety Equipment

1 x 12 person liferaft
3 x life rings
14 x life jackets

Fire fighting, signalling and rescue equipment all meets MMA requirements

Disclaimer

The details of this vessel is offered in good faith but cannot be guaranteed. Nor can we warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.