Wright International Ltd is delighted to be able to bring this 300’ x 90’x 18’ Deck Cargo Barge designed to carry 8200 Tonnes and with a deck load of an amazing 15 T/m2. The world is calling out for quality barges and this one is able to be bought NOW to be added to your fleet. It has flush deck and twin skegs. The main hull is divided by six (6) transverse W.T. bulkheads and three (3) longitudinal W.T. bulkheads into twenty-two (22) compartments. It is designed and built to ABS + A1 barge to allow it to be used in almost every port in the world. Take a look at the full specification and if you would like to take this opportunity whilst it is still available then Wright International Ltd can put you in contact with the manufacturer to arrange a viewing.
| Vessel Type: | 8200 Tonne Deck Barge |
| Model: | 8200 Tonne Deck Barge |
| Price: | $1,750,000 |
| Reference: | WIL 1521 |
| LOA: | 91m 50cm |
| Beam: | 27m 46cm |
| Draft: | 5m 50cm |
All materials and workmanship will be of the highest quality, with all steel plates, sections, hull forging and castings met with ABS Classification requirements and approval. What makes this barge special is the Manufacturers did not take short cuts with the construction.
For instance if you look at the thickness of materials you will see that the plate thickness is:-
Bottom Plate 16mm
Deck Plate 16mm
Side shell 12mm
Longitudinal BHD 10mm
Transverse BHD 10mm
What keeps the vessel in shape is the cathodic protection and to make sure this barge lasts the manufacturers have installed 60, yes sixty anodes below the waterline to make sure it is well protected.
| Hull Material: | Steel |
The details of this vessel is offered in good faith but cannot be guaranteed. Nor can we warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

ript>