34m 70 Pax Fast Crew Boat

Wright International Ltd is delighted to be able to bring this superb 70 Pax Fast Crew Boat at a time when the world appears to be needing quality vessels like this. Made to order these boats are manufactured to comply with BV – Bureau Veritas International Standards. This allows the owners to operate in Oil Fields, Wind Farms etc with the ability to deliver 70 passengers at speeds of up to 30 knots with just 8 of a crew. Powered by the ever reliable Cummins KTA38 M2, this vessel has a choice of triple or twin 1350 BHP (1007kW) engines delivering the power through the 2.53:1 gearboxes down the shafts to the twin four bladed fixed pitch nickel aluminium bronze propellers.

This modern state of the art vessel has seating for 70 persons for the offshore personnel to travel in comfort to their destination. The choice on number of engines giving an option on how fast that is too be. The vessel has toilets on board for their convenience and has a walkround deck allowing the passengers to stretch their legs. Being a Crew Boat it is also important to have the facility to carry cargo on the aft deck. That is why the designers of this vessel allowed a clear 13,4m x 6m giving 80 sq meters of space to carry the 40 Tonnes capacity. What separates this vessel is the excellent sea keeping qualities at speed. The semi-planing type mono hull with its hard chines and vee bottom delivers speed without losing comfort for the 70 passengers and 8 crew.

If you are in the market for a 70 PASSENGERS CREW BOAT then we would be delighted to discuss this option further with you. Wright International Ltd is open for business every day of the year and we are only an e mail or cell call to start you on the way to owning a fast, comfortable 70 PASSENGER CREW BOAT.

PLEASE NOTE: The price shown is for BUDGET purposes only and should not be taken as a fixed price. Price is strictly on application.

enlarge picture	enlarge picture

Dimensions

enlarge picture	enlarge picture

Engines

MAIN ENGINES
If you are in the market for a FAST CREW BOAT then you will have seen the Internet has lots to choose from. Some will give you speed some will give you cargo and some like the aluminium boats will promise you everything so long as there are no waves to stop you. So what if you wish to work offshore up to 200 mile from safe haven then you have to have a reliable set of engines to deliver your passengers safely to their destination.

That is why the designers of this vessel allow YOU to choose from either TWO engines as normal or as shown THREE engines delivering a wide range of fuel economy and speed options. You can run on one, two or all three engines depending on your desire for power or speed. The choice of engines is open to discussion but the yard has selected for this vessel the heavy duty, high speed marine diesel Cummins KTA38M2 watercooled, fuel injected, single acting four stroke turbo charged engines.

The 12 cylinders with their 159mm bore x 159mm stroke deliver 1350 BHP (1007kw) each at 1950 rpm. The power is transmitted down through the 2,53:1 reduction gearboxes to the Aquamet steel shafts to the four bladed fixed pitch nickel aluminium bronze propellers.

GENERATORS
Again working in conjunction with the yard you can have either TWO or THREE Generators. They will be high speed marine diesel in line engines that are heat exchanger cooled fuel injected and 24V electric started.

Rating : 85 kW.
Voltage : 415/3/50, 0.8 P.F.

Harbour Generator
1 x Harbour Generator of high speed marine diesel engine, in-line, heat
exchanger cooled, fuel injected and electric start (24vDC) of 25KW capacity shall be fitted. The voltage requirement is 415/3/50Hz.

BUNKERAGE
•Fuel Oil : 50 m3 (approx.)
•Freshwater : 20 m3 (approx.)
•Lubricating Oil : 1 m3 (approx.)
•Estimated Gross Tonnage : 250
•Estimated Net Tonnage : 75

Fire Pump / GS Pump
•Type : Horizontal, centrifugal, self-priming.
•Rating : 30 m3/h at 30m head.
•Drive : Electric motor.

Bilge Pump
•Type : Centrifugal type
•Rating : 30 cu.m./hr at 30m head
•Drive : Electric motor

2 x Freshwater/S W Pressure Sets
•Type : Horizontal, centrifugal, self-priming.
•Pump Rating : 2.1 m3/h at 22m head.
•Tank Capacity : 25 litres.
•Drive : Electric motor.

Steering Gears
•Type : Electro-hydraulic, twin cylinder and tiller.
•Rating : sufficient torque.
•Drive : Electric motor.

2 x Rudders and Rudder Stocks
•Rudders : Semi-spade, balanced and streamlined of all welded
•double-plated construction.
•Rudder Stocks : Stainless steel

Oily Water Separator
•Rating : 0.5 T/hr
•Drive : Electric Motor.

Fuel Oil Purifier
1 x self-cleaning fuel oil purifier is to be installed with suction from the
settling tank and discharge to the daily service tanks. Sludge and water from the purifier is to be led into the sludge tank in the double bottom.

Bow Thruster
One unit bow Thruster of electric motor drive shall be fitted onboard vessel. The Thruster shall be of Thruster tunnel type with approximately 700 kgs thrust. The Thruster shall be control with independent frequency converter (6 puls) to regulate the speed of the propellers.

Dispersant system
2 x oil dispersant spray booms each with sufficient spray nozzles shall be suitably stowed on the port and starboard side of vessel. The system shall have suitable agitation boards and adaptable dispersant / water mixer. The dispersant tank shall be permanently piped to an eductor proportioned with non return valve to spray boom.

Capacity of each nozzle shall be 125 litre/min at 5 kg/cm2 for oil dispersant liquid / sea water. The sea water pump shall be vertical, centrifugal, non-self priming, electric driven of capacity 82 litres/min and capable of driving an eductor system.

enlarge picture	enlarge picture

Construction

TONNAGES
•Gross Tonnage : 250
•Net Tonnage : 75
The above figures are estimates and for guidance only. Final tonnages shall be obtained from Class or Marine Department Authority.

Classification, Regulations, Surveys and Certificates
•Classification Society : American Bureau of Shipping (ABS) or Bureau Veritas
•Class notation : +AHS + AMS HSC Crew Boat
•The following regulations (where applicable) shall apply: -
•Classification Rules for construction of High Speed Craft or equal.
•IMO Code of Safety for High Speed Craft (Cat A) as applicable.
•Marine Department Regulations.
•International Conventions on Tonnage Measurement of Ships, 1969.
•International Conventions on Load Lines, 1966.
•MARPOL 1973 with amendments of 1978 (Statement of Fact Only)
•IMO stability guides as applicable to this vessel.
•SOLAS, 1974 with all amendments (Statement of fact Only)
•International Regulations for Preventing Collisions at Sea, 1972

FLAG OF REGISTRY
The vessel shall be registered in Malaysia, and shall comply with all the Marine Department Authority’s maritime regulations. The Owner shall arrange and pay for all fees incurred for the registration of the vessel. The builder shall be responsible to comply with the Marine Department Authority’s requirements such as operational, inspection and maintenance requirements applicable to operating such crafts.

HULL AND SUPERSTRUCTURES
The hull shall be built with seven (7) watertight bulkheads dividing into eight (8) watertight compartments: -
•Steering gear compartment
•Fuel Oil Tank Room
•Store Room
•Freshwater Tanks
•Engine Room
•Crew Accommodations
•Fore Peak.

Construction Materials
All plating and profiles for the hull & superstructure shall be of all welded Aluminium Alloy construction (Class tested marine grade seawater resistance type).

Plating - 5083H321 or 5083H116
Profiles - 6061T6 or 6082T6

Profiles shall be of extruded T or L-type or similar with optimized scantlings as Approved by Classed.

DECK COVERINGS, LININGS AND CEILINGS
The arrangement and material for ceilings, deck coverings, insulation, bulkheads and linings shall be in accordance to the structural fire protection plan as required by Marine Department Authority or to SOLAS for Non-Convention Ship as applicable.

The clear room height (personnel aisles and open areas) shall be at least 2.0m excluding any protrusion such as light fittings, etc. Much attention shall be given to noise reduction in personnel saloon for comfort.

Deck Coverings
•Good quality vinyl suitable for marine application (Forbes or equal) – all internal offshore personnel space and wheelhouse.
•Non-skid vinyl tiles - all washrooms.
•Vinyl tiles – crew cabin.
•Rubber mats - main switchboard area.
•Deck paint - all exterior decks, stores, and CO2 room.

enlarge picture	enlarge picture

Accomodation

When Wright International Ltd considered the specification for this vessel they were amazed at the level of finish that has gone into thee production of these 34m FAST CREW BOATS that carry 70 Passengers and up to 10 of a Crew. These boats may have been designed and built in Malaysia but they are finished to a European standard to be proud of.

LAYOUT
The Layout of each vessel is again subject to confirmation with the “Buyer” and the yard to get from the vessel what was intended for your application. The vessel in the GA has as a Layout:-
•Wheelhouse
•Offshore Personnel Seating Compartment (70 persons)
•Owner’s Cabin
•Passenger toilet
•2 x Crew Washplace – One on main deck and one below main deck. The top toilet shall be eastern type and the bottom toilet shall be western type WC. (This can be discussed at time of order)
•CO2 room
•Two (2) bed medical room (Hospital)
•Laundry
•Galley
•Messroom
•Six (6) Cabin to accommodate 8 crews.

Interior Furnishings
•Berth – L 1900 x W 750 x H 250/1200 mm - double tier/single c/w drawers below bunk, wall mounted berth light 18w and mattress.
•Cabinet - shall be of built-in type with shelves as necessary.
•Chair - shall be upholstered of fixed low back.
•Curtain - shall be of good quality material c/w rails for all windows.
•Desk - c/w drawers with positive catches and a wall mounted desk light
18w. Desktop shall be finished with decorative Formica.
•Linen - two (2) sets of fitted bed sheets, pillow cases for each berth.
•Locker (crew) - shall be of W 450 x D 550 x H 1800 mm, c/w shelves,
hanger rods, hooks, lifejacket stowage on top, drawers and shoe rack.
•Mattress - shall be of 100mm thick, of good quality and durable type foam.
•Settee - shall be fabricated of aluminium frame and fire retardant foam c/w vinyl upholstery (built-in type) and fitted with lockers underneath.
•Shelves - wooden shelving shall be fitted as necessary in all stores.
•Table - shall be of pedestal type with aluminium frame, and secured by
bolts onto the deck. Table top shall be made from 20mm thk honeycomb
panel faced with decorative Formica sheet and fitted with fiddle edge.

Sanitary Accessories
•Water closet - Eastern style toilets fitted with sanitary water hoses.
•Wash basin – Stainless steel fitted with cold water tap, rubber stopper and keeps chain, and c/w a liquid soap dispenser and tray, and cabinet with mirror.
•Shower cubicle – Aluminium sheet with reinforcement, c/w swivel head
shower, stainless steel storm rail, soap tray.

Wheelhouse Fittings
•One (1) fwd control console c/w steering station
•One (1) aft control console c/w steering station
•One (1) chart table
•One (1) radio table
•One (1) flag locker
•One (1) helmsman's position c/w upholstered chair
•One (1) cabinet

Offshore Personnel Space Fittings
•Flooring shall be fitted with square shape heavy duty vinyl tiles.
•Hot & cold water dispenser (19 litres) c/w disposable paper cup holder
•One (1) 29” LCD CTV. (ceiling mounted)
•One (1) DVD/VCD player
•Four (4) spare power points, evenly distributed in the compartment

(2 in Nos)1-Man Cabin Fittings
•One (1) single berth
•One (1) locker
•One (1) desk and upholster chair

(2 in Nos)2-man Cabin Fittings
•One (1) double tier berth
•Two (2) lockers
•One (1) desk and upholster chair

Captain’s Cabin Fittings
•One (1) single berth
•One (1) lockers
•One (1) desk and upholster chair
•One (1) book cabinet

Chief Engineer’s Cabin Fittings - Similarly furnished as per Captain’s Cabin.

Owner’s Cabin
•One (1) double berth
•One (1) lockers
•One (1) desk and upholster chair
•Two (2) filing cabinet

Office
•One (1) desk and upholster chair
•Two (2) filing cabinet

Messroom Fittings
•One (1) dining table
•One (1) L-shaped settee
•One (1) sideboard
•One (1) 20” LCD CTV and DVD/VCD player

Galley Fittings
•One (1) electric cooking range (2 hot-plate)
•One (1) 500 l refrigerator (2-door, stainless steel)
•One (1) electric kettle
•One (1) stainless steel single bowl sink
•One (1) crockery and cutlery set
•One (1) dish and cup rack
•One (1) microwave oven
•Galley exhaust fan of high capacity shall fitted to ensure that odours from preparation of food do not circulate through recreation/cabin spaces.

Crew Washplace Fittings
•One (1) shower for each toilet.
•One (1) wash basin for each toilet.
•One (1) Eastern Style toilet for main deck toilet and one (1) western style for below deck toilet and shall be fitted with sanitary water hose.

Personnel Toilet Fittings
•One (1) wash basin
•Two (2) Eastern Style toilets fitted with sanitary water hose.
•Shower area.

Store Fittings
•Sufficient shelves shall be provided as necessary.
•One (1) 20 Cu Ft Freezer Unit.

Laundry Fittings
•One (1) 7 kg (Commercial) Washing machine
•One (1) 7 Kg (Commercial) Dryer
The washing machine and the dryer shall be installed at area outside of the Master and Chief Engineer cabin at port and starboard side.

Decking Equipment

All deck equipment shall be in accordance to Class requirement (wherever applicable). The following equipment is for guidance. (Note: - The final size and capacity of anchors, chain & ropes, and winch shall be subjected to the Class requirement for the intended services.)

Anchors, Chains & Ropes
•Anchors : High Holding Power type, 1 x 135kg (approx.)
•Chains : Steel wire rope (length and breaking strength as required by Class) c/w 12.5M x 14mm dia stud link chain.
•Spare anchor : 1 unit
•Winch - (1 no.)
•Type : Electrical, single drum and warping head.
•Rating : 1. 0 tonnes nominal pull at 9m/min.
•Drive : Electric motor power pack. One spare motor is to be supplied.

Mooring Equipment
•Bollards : Six (6) x 100mm dia. double-bitt.
•Mooring Chocks : Four (4).
•Mooring Ropes
•Full set of mooring ropes shall be provided to vessel.

enlarge picture	enlarge picture

enlarge picture	enlarge picture

Navigation Equipment

All navigation aids equipment shall be to the Marine Department Authority and to the approved HSC 2000 Code requirements (wherever applicable).

•Radar (X-Band) : 2 x 48 nm range, 4 kW, 24 rpm c/w 250mm CRT display. 1 x unit with ARPA and the other one without ARPA.
•1 x Echo Sounder : 300m range c/w 8 colors, 150mm CRT display
•1 x Compass : standard magnetic desktop type
•1 x GPS : c/w 4.5” LCD display.
•1 x Auto pilot :
•1 x Gyro Compass : with repeater in wheelhouse and steering gear room.
•1 x Navigation Lights
•1 x Ship Horn : 24V D.C.
•1 x Signal Lamp : Aldis signaling type 100 mm.
•1 x Bell : 300 mm.
•1 x Loud Hailer
•1 x Binoculars :
•Charts : 1 x set admiralty (local).
•Navigation : 1 x set c/w parallel Instrument ruler, divider instrument and magnifying glass.
•Flags : 1 x set International Flag c/w Marine Department ensign.
•Shapes : 2 x circular and 1 x diamond, 600 mm.
•1 x Clock & Barometer
•1 x Clinometers
•1 x Anemometer
•1 x Chronometer
•1 x Rudder Indicator
•1 x Engine RPM Indicator for each engine.
•AIS : Automatic Identification System shall be fitted and shall conform to the International Convention for the Safety of Life at Sea (SOLAS) as amended, and the International Maritime Organization (IMO) Performance Standard for AIS.
•1 x SDVR
•Ship Security Alert System.
•2 x Searchlight : 1000W
•1 x Aldis Lamp

All communication equipment shall be to the Marine Department Authority and the latest SOLAS requirements (wherever applicable). Communication equipment shall be generally in accordance to GMDSS Area A1, A2 & A3.

Communication Equipment
•1 x SSB Radiotelephone : 150W, 200 channels, 1.6 – 27.5MHz.
•1 x MF/HF DSC Terminal
•2 x VHF/FM Radiotelephone : 25w output, semiduplex/simplex GMDSS c/w built-in
•DSC/CH-70 receiver. ITU simplex channels 6, 10, 11, 12, 13, 14, 16 and 67; ITU semi-duplex channels 21 (TX 157.050/RX161.650) and 80 (TX 157.026/RX 161.625) dual watch capability with channel 16 as preference channel.
•1 x Navtex Receiver
•1 x EPIRB
•2 x SART
•3 x VHF Radio : handheld VHF, 2.5W, intrinsically safe type and c/w one spare battery and charger
•1 x P.A. & Intercom
•1 x Inmarsat “C”
•1 x Satellite Phone/fax :Mini M. Owner shall obtain necessary exemptions from Marine Department Authority in relation to outside GMDSS Area 1, 2 & 3 where applicable.

Safety Equipment

LIFESAVING APPLIANCES
All life-saving appliances shall be to the Marine Department Authority as applicable and to comply to HSC Code 2000.
•4 x 20 man Liferafts : lightweight inflatable type fitted with hydrostatic release.
•8 x Lifebuoys : Two (2) c/w 30m lifelines, two (2) c/w self-activating smoke signals and four (4) c/w self-igniting lights.
•90 x Lifejackets : SOLAS approved type.
•2 x EEBD
•8 x Work Vest : units complete with retro-reflective material c/w lights.
•2 x Scrambling net :of size 4 x 3 m.
•1 x Line Throwing : 'Schermully' type with 4 projectiles & lines.

Apparatus
•1 x Distress Signals
•2 x Float lights : automatic c/w battery.
•1 x First aid kit : medical outfit.
•2 x Boat hook : c/w approx. 2.4 m handle.
•1 x Rescue/Work Boat : inflatable rescue boat c/w 25hp outboard engine and capable of carrying at least 6 persons. The vessel shall be fitted with proper and efficient securing fittings and c/w a launching and recovery davit/crane. The davit/crane SWL shall be 800kg.
•Retro reflective tapes shall be fitted to all life-saving appliances.

FIRE-FIGHTING EQUIPMENT
•All fire fighting equipment shall be to the Marine Department Authority and the
•latest SOLAS requirements. The following shall serve as guidance; the final type, quantity and location shall be according to the approved Safety and Fire Plan.
•1 x Fire hydrants : in engine room, and 2 x on deck.
•1 x Fire hoses : 15m hose c/w spray-jet nozzle for each hydrant stowed in reel
•2 x Fireman’s outfit : complete with breathing apparatus.
•International Shore Connection

Fire Extinguishers
•Wheelhouse : 2 x 9 litre dry powder.
•Personnel Saloon : 2 x 9 litre dry powder.
•Engine Room : 2 x 9 litre foam.
•1 x 2.5 kg CO2.
•CO2 System : Manual flooding system for engine room.
•Alarms & fire monitoring panel.
•Emergency One sets of smoke and heat detectors, manual

Systems call points and fire alarms.
•The Offshore personnel area shall be fitted with fixed type sprinkler system as required by HSC Rules.
•External Fire Fighting System
•A centrifugal type sea water pump of 600 m^3/hr capacity with engine driven shall be fitted as per General Arrangement Drawing.
•Two fire monitor shall be fitted aft of the main deck.
•Fog spray system shall be fitted only on the wheelhouse top (port and starboard side).

Disclaimer

The details of this vessel is offered in good faith but cannot be guaranteed. Nor can we warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.